ADTRAN 25 manual Installation

INSTALLATION

4.lf a DXS is supplied, place it beside the attendant console. For locally powered DXS, do Steps 5 through 8. For remotely powered DXS, do Steps 9 through 13.

Locally Powered DXS

5.Plug the 400B2 Adapter into the wall jack.

6.Plug one end of the D6AP-87 Cord into the 6-conductor modular jack of the 400B2 Adapter; plug the other end into the KS-22911, L1 power supply.

7.Plug one end of the second D8W-87 Cord into the 8-conductor jack of the 400B2 Adapter; plug the other end into the modular jack on the bottom of the DXS.

8.Plug the power supply into an AC outlet. Remotely Powered DXS (Figure 2-35)

9.At the SIP, locate the DXS appearance and disconnect the octopus cable plug.

10.Insert one end of a D8W-87 Cord into the SIP adapter jack; plug the other end into the 8-conductor modular jack on the 40062 Adapter.

11.Insert one end of the D6AP Cord into the 6-conductor modular jack on the 400B2 Adapter; plug the other end into one of the modular jacks on the 346A Power Unit.

12.Connect the modular plug on the 400B2 Adapter to one of the modular jacks on the 451A Adapter.

13.Connect the octopus cable plug to the other modular jack on the 451A Adapter.

2-85