ADTRAN 25 manual For Qualified Systems Technicians only, Action Description

APPENDIX E: Administration Codes and Data

Table E-R. Port Options

PORTS, Station/Trunk/Special Port Circuit Board Options

FOR QUALIFIED SYSTEMS TECHNICIANS ONLY

(See Table E-S," Applicable Options " )

ACTION DESCRIPTION DATA

32Set CO disconnect time (in 20 msec [0-2540 msec; 500] increments)

33Set end-to-end signaling tone timing (in 20 msec increments)

FOR TN742 AND ZTN78 ONLY:	[20-2540 msec; 340]
FOR ALL OTHER BOARDS:	[0-2540 msec; 60]

34Set end-to-end signaling pause timing (in 20 msec increments)

	FOR TN742 AND ZTN78 ONLY:		[20-2540 msec; 100]
	FOR ALL OTHER BOARDS:		[0-2540 msec; 60]
35	Set hybrid balance. Data is balance		[1/0] .
	t y p e :	1=Resistor;
	0=Resistor/Capacitor.	Trunk ports
	default to 0; station ports default to 1.		[ 1 / 0 ]
36	Set gain; 1 (Gain=3dB) or 0 (Gain=0dB)
37	Set E&M signaling type. Data is		[ 0 - 2 ]
	signaling type 0 (Type 1 compatible), 1
	(Type V), or 2 (Type l).
38	Set answer supervision delay timing		[0-51 00 msec; 300]

Warning: The default values in Tables E-Rand E-Smust not be changed without the support and guidance of Tier Ill s t a f f .

E-33