ADTRAN 25 manual Action Description, Starlan CP

APPENDIX E: Administration Codes and Data

Table E-K.	PORT/PDC Administration,	Data Terminals (Menu=1/2)
	(Contd)
ACTION	DESCRIPTION		DATA
67	Allow terminal to operate at a baud rate		[1=Y/0=N]
	of 9600 bps†
68	Allow terminal to operate at a baud rate		[1=Y/0=N]
	of 19200 bps†
69	Assign this parity setting to correspond		[0-3; 2]
	with terminal’s parity setting†
			0= Bit in parity
			position (no parity);
			1 =Bit in parity
			position (no parity)
			2=Even parity;
			3= Odd parity
70	Allow keyboard dialing/Command Mode†		[1=Y/0=N]
71	Allow user configuration of data port		[1=Y/0=N]
	parameters.† (The default is 0 for
	STARLAN CP.)
72	Allow mismatch of user’s data module		[1=Y/0=N]
	and data port baud rate†
73	Allow characters dialed from keyboard		[1=Y/0=N]
	to be echoed by the data port†
74	Enter your disconnect code†		[1=2 short BREAKS/
			0=1 long BREAK]
75	Allow call progress text messages to be		[1=Y/0=N]
	displayed on screen.†
77	Display connection indication	message†	[1=Y/0=N]
90	Assign/remove DDC Display ID		["11 characters
			or less", or ""
			to remove]

† Read-only for STARLAN CP.

E-24