INSTALLATION

INSTALL CUSTOMER’S SAT

The SAT can be connected through the SIP to the CPU/Memory CP by any one of the following methods:

l On-premises nonswitched connection (no ADU required if the SAT is plugged into the system AC outlet)

l On-premises switched connection

l Off-premises nonswitched connection

l Off-premises switched connection.

SMDR equipment can also be connected by any of the four methods listed above. The DTU can be connected only by the on-premises nonswitched connection.

Nonswitched Connection of Equipment Plugged Into System AC Outlet

See Figure 2-45.

1.Connect the RS-232C plug on the peripheral equipment to the RS- 232C receptacle on a 355AF Adapter (an extension cable may be used).

2.Using a D8W-87 modular cord, connect the 355AF Adapter to the appropriate SIP adapter jack.

2-102

Page 127
Image 127
ADTRAN 25 manual Install CUSTOMER’S SAT