ADTRAN 25 manual CP in Slot Port Displayed, Yes CP Type Listed #

MAINTENANCE

Messages displayed on the SAT indicate which restart is being performed. The same type of information is displayed for a cold and a warm restart. This information consists of a listing of the version of the firmware loaded in the CPU/Memory CP and a configuration listing of all CPs recognized by the system. The CPU/Memory CP is not listed in the configuration listing; however, it should be located in slot 1 of Cabinet 1.

Table 4 A provides a listing of SAT messages that may be displayed during a cold or warm restart. The displayed message is a result of CP occupancy, type,

and port translations.

Displayed SAT Messages During Cold or Warm Start

	CP IN SLOT		PORT		DISPLAYED
			TRANSLATED		MESSAGE
	No		Yes		Missing †
		.	L
	Yes			No	CP Type Listed #
	Yes		Yes		CP Type Listed
	Yes		Yes (doesn’t match		CP Type Listed *
			physical CP)
	Yes (Unsupported		Yes or No		Illegal
	CP Type)
† Warm Start Only.

# Mark indicating that the CP is unused.
*	Mark indicating that the CP is mismatched.

November 1995 4-25