
MAINTENANCE
4.Press the REWIND button, and wait for the unit to fully rewind the tape. This step ensures that the tape is played from the beginning.
Note: The system automatically compensates for the clear “leader” material at the beginning and end of the tape.
Saving Translations
Follow these steps to save translations on tape:
1.Complete the steps listed above under “Setting Up the DTU. ”
2.Press both the RECORD and PLAY buttons simultaneously. (The unit should not yet begin to run.)
3.Log on to the SAT (if not already logged on).
4.The system displays the main menu prompt:
Make one selection from menu
5.Enter 9 for the SAVE/RESTORE selection.
The system responds with: >Action=.
6.Enter 1.
The system responds with: Save/Restore: Action= 1 Data=.
7.Enter D.
The system completes the word Data followed by the = sign.
8.Enter 1.
The system responds with: Save/Restore: Action=1 Data=1
W24: YOU ARE ABOUT TO START A TAPE SAVE Keyboard input is blocked while doing tape operation c to continue, any other key for abort