Test Dictation System Access, Test Paging Interface

TEST DICTATION SYSTEM ACCESS

Place a call to verify that dictation equipment can be accessed. If dictation equipment has not been installed, this feature cannot be tested.

1.Use a working voice terminal as the test terminal, and go off-hook.

2.Dial the access code or PDC, and the number associated with the dictation equipment.

3.Verify that ready or talkdown tone is transmitted.

4.Transmission in both direction should be tested. Make a recording and play it back

5.Go on-hook.

Place a test call to each paging zone to verify that paging equipment can be accessed.

Note: If testing ZoneMate 9 (used with PagePac 20), get an acknowledge tone. Then dial the zone code, and make an announcement.

1.A t any working voice terminal, go off-hook and dial the access code or PDC for a particular zone.

You may hear a confirmation tone.

2.Make an announcement into the handset.

—You should hear the announcement from the loudspeaker(s).

3.At the calling voice terminal, go on-hook.

4.Repeat Steps 1 through 3 for all paging zones provided.

3-13