ADTRAN 25 manual FCC Notification and Repair Information AT&T System

FCC NOTIFICATION AND REPAIR INFORMATION

AT&T SYSTEM 25

This telephone equipment is registered with the Federal Communications Commission (FCC) in accordance with Part 68 of its Rules. In compliance with the Rules, be advised of the following:

MEANS OF CONNECTION

Connection of this telephone equipment to the nationwide telecommunications network shall be through a standard network interface USOC RJ21X jack. Connection to private line network channels requires USOC RJ2GX jack for tie lines or USOC RJ21X jack for off-premises station lines. Connection to T1 facilities requires USOC RJ48X or RJ48C jack. These can be ordered from your telephone company.

NOTIFICATION TO THE TELEPHONE COMPANY

If the system is to be connected to off-premises stations (OPSs), you must notify the telephone company of the OPS class of service, OL13C, and the service order code, 9. OF. For R3 systems, the Analog service order code is 9.0Y, the Digital service order code is 6.0Y.

Upon the request of the telephone company, inform them of the following:

—The Public Switched Network “lines” and the Private “lines” to which you will connect the telephone equipment.

—For private line connections, provide the facility interface code, TL31M for tie lines. You must also specify the service order code, 9.0F or 9.0Y for R3 systems.

Customer instructions will advise the customer to provide the telephone company with the registration number (either -MF or -KF, depending on the application of the system) and the ringer equivalency number (REN) from the label on the equipment. In addition, customer will be advised

c