Appendix F Administration Error Messages

APPENDIX F: Administration Error Messages

	ERROR MESSAGE
	AND DESCRIPTION	POSSIBLE SOLUTION

1006:	incorrect entry	Cabinet-Slot-Port (CSSPP) PP must
	port-on-board number out	be a number from 1 to 8 (varies on
	of range	different circuit packs)

1 0 0 7 : incorrect action number		Must administer ACTION = 1 before
	can ‘t exceed 1 with	proceeding.
	unequipped facility

1008:	incorrect entry	The entered port is greater than
	port-on-board number out	maximum port number on the
	of range	associated board.

1 0 0 9 :	incorrect entry	Number must be 5 digits. Nonspecial
	number must be 5 digits	port does not have 5 digits.

1010:	incorrect facility type	The facility type is not valid for this
	does not exist or used	system .
	improperly

1 0 1 1 : inappropriate request		Go to MENU 5 (FPDC)
	FPDC already exists	ACTION	= 1
		Hit c to continue to list FPDCs.
		FPDC could be not assigned.

1012:	incorrect PDC	The entered number is valid but is not
	does not exist or used	a station or data port.
	improperly

1 0 1 3 : inappropriate request		Port type has to be administered
	slot not equipped	before	proceeding.

1014:	inappropriate request	Must be a station supported by
	must be station	System 25. See Voice Terminal Type
		Codes in Administration Manual. Can
		only move port associated with
		station.

1 0 1 5 : inappropriate request		Can not move the port associated
	can’t move CAP port	with the CAP.

1016:	incorrect action number	Item numbers must be 0-2 at this
	must be 0-2	point .

F-2