APPENDIX F: Administration Error Messages
ERROR MESSAGE
AND DESCRIPTION POSSIBLE SOLUTION
1044: inappropriate request Neither primary nor secondary CAP
primary or secondary CAP universal port number agrees with the
unavailable
one stored by admin. on the stack.
1045:at installed max At system maximum of 104 data
-104 data port ports.
1046: incorrect button
Duplicate button function code found.
function code
button facility already
exists
1047: incorrect button number
Button number out of range for voice
out of range or reserved terminal type or certain button types
for system use are not assignable.
1048: inappropriate request Certain feature buttons are not
CAP buttons fixed - can’t
administrable on the CAP.
assign
1049:inappropriate request A DID trunk cannot be part of an
DID trunk can’t be pool
outgoing trunk pool facility
member
1050: incorrect facility type Must be an ATL or MET set before
must be ATL set or MET
you can administer a button feature
set
or facility type. Facility type cannot
be used in conjunction with this
button function code.
1051: inappropriate request
At system maximum for sets allowed
group station max reached in a particular group.
1052:at installed max
Can only install 1 Service Circuit per
-Service Circuit system.
1054:incorrect button
External button code entered by
function code customer is invalid.
does not exist or used
improperly
1055: entry out of range Allow a 0-1 only, any other input is
must be 0-1 with invalid.
station/ring enable
F-5