MAINTENANCE
Restoring Translations
N o t e : Restoring translations from tape removes the system from operation for about 5 minutes.
When it is necessary to restore system translations from tape, follow these steps:
1.Complete the steps under “Setting up the DTU,” using the cassette on which translations were saved.
2.Press the PLAY button on the tape unit. (The unit will not run at this time.)
3.Log on to the SAT, if not already logged on.
The system displays the main menu prompt:
Make one selection from menu
4.Enter 9 for the SAVE/RESTORE selection.
The system responds with:
Action= .
5.Enter 3.
The system responds with: Save/Restore: Action=3 Data=.
6.Enter D.
The system completes the word Data followed by the = sign.
7.Enter 1.
The system responds with: Save/Restore: Action=3 Data=1
W26: YOU ARE ABOUT TO START A TAPE RESTORE c for continue, any other key for abort
