ADTRAN 25 manual Test ATL Cordless Telephone, Test Dial Access Codes, Test System Features

SYSTEM TESTS

TEST ATL CORDLESS TELEPHONE

The ATL Cordless Telephone must be tested to see if it functions properly. The transmission quality must be verified when the base and handset are separated by the maximum operating distance.

Use the documentation provided with the ATL Cordless Telephone to perform the required tests.

TEST DIAL ACCESS CODES

1.Using a single-line or multiline voice terminal, verify the proper operation of each feature requiring a dial access code (Night Service access code).

2.lf any feature is not working properly, verify the translations at the SAT.

TEST SYSTEM FEATURES

You can test a number of system features from a multiline voice terminal: Automatic Route Selection (ARS), Station Message Detail Recording (SMDR), Direct Group Calling (DGC), System Speed Dialing, PDC login, and Call Coverage. (Note! You can also use a single-line voice terminal to test all of these features except for Call Coverage.)

ARS and SMDR Tests

If ARS patterns have been translated, you can test the routing by placing long-distance calls and checking the trunk indicated on the SMDR output. To use the SAT to print SMDR records, unplug it from port 1 and attach it to port 2.

To verify ARS patterns:

1.Determine which long-distance numbers to call by examining the System Administrator’s ARS patterns.

3-6