ADTRAN 25 manual Cables

INSTALLATION

Cables

Splitter Cables

The splitter cables (Figure 2-5) connect trunk circuits from the 700A jacks to the system cabinets or 10B ETU (3:1 only).

3:1 Splitter Cable (WP90929, L1)

This cable connects the twenty-four 1-pair trunk circuits on a 700A jack to three 8-port trunk circuit packs (loop start, ground start, or DID). The connection may be either director through a 10B ETU. Al 25-pair ribbon connectors on the cable are male.

2:1 Splitter Cable (WP90929, L3)

This cable connects eight 3-pair tie trunk circuits on a 700A jack to two 4-port tie trunk circuit packs. All 25-pair connectors on the cable are male.

.

3:1 SPLITTER CABLE W P 9 0 9 2 9 , L 1

2:1 SPLITTER CABLE WP90929,L3

Figure 2-5. Splitter Cables