INSTALLATION
Cold and warm starts both display the same type of information on the SAT. This
consists of a listing of the version of the firmware loaded in the CPU/Memory
CP, followed by a configuration listing of all CPs recognized by the system. The
CPU/Memory CP is not in the configuration listing; however, it is located in slot 1
of Cabinet 1.
Table 2-C provides a listing of SAT messages
cool or warm start. The displayed message is
and port translations.
that may be displayed during a
a result of CP occupancy, type,
Table 2-C. Displayed SAT Messages During Cold or Warm Restart
Circuit Pack (CP) Port Translated
Displayed
in Slot
Message
No Yes
Missing
†
Yes
No
CP Type Listed #
Yes
Yes
CP Type Listed
Yes
Yes (doesn’t match
CP Type Listed*
physical CP)
Yes (Unsupported Yes or No
Illegal
CP Type)
† Warm restart only.
# Mark indicating that the CP is unused.
* Mark indicating that the CP is mismatched.
November 1995
2-37