ADTRAN 25 manual Install Starlan Network Interface, ZTN84 Starlan Interface CP Connection 112

INSTALLATION

INSTALL STARLAN NETWORK INTERFACE

Note: Support for the STARLAN Interface has been discontinued.

The ZTN84 STARLAN Interface CP provides an interface between the System 25 TDM bus and a STARLAN NETWORK local area network (LAN). An octopus cable connects the ZTN84 CP to a Network Extension Unit (NEU) on the STARLAN NETWORK (Figure 2-49).

1.Select the cable label sheet (Figure 2-7)that identifies the cabinet (blue for #l, orange for #2, and green for #3).

2.On an octopus cable, attach an appropriate label (CAB1 SLOT8, for example) on the last flag-type cable tie and on the back of the hood of the 25-pair connector.

3.Connect the 25-pair connector end of the octopus cable to the ZTN84 receptacle on

4.Connect the modular plug on leg 1 of the octopus cable to an NEU IN jack.

LEGEND:

ZTN84 - STARLAN INTERFACE CP

C1 - OCTOPUS CABLE ( WP90780 )

NEU - NETWORK EXPANSION UNIT

Figure 2-49. ZTN84 STARLAN Interface CP Connection

2-112