ADTRAN 25 manual Tools and Test Equipment

INSTALLATION

TOOLS AND TEST EQUIPMENT

Table 2-A lists tools and test equipment required for installing a System 25.

Table 2-A.	Tools and Test Equipment Required for Installation
T a s k s		Tools Required			Recommended Type
Install		Push Drill
Cross-Connect		Screwdriver		8-inch Flat Blade
Field		Carpenter’s	Level	30-inch
		R u l e		30-inch
		Chalk Line
		11 O-type Punch-down Tool		AT-8762 D-Impact Tool
		A d a p t e r		BR866 JC (403608235)
Unpack		Tin Snips
Cabinet		Utility Knife
		Adjustable	Wrench		6 - o r 8 - i n c h
Install		Rule		30-inch
Cabinets		Adjustable	Wrench	6- or 8-inch
or Add		Screwdriver		8-inch Flat Blade
Carriers		Allen Wrench		1/8-inch
Add Voice
Terminals		Diagonal Pliers
or Install		Screwdriver		8-inch Flat Blade
Auxiliary		11 O-type Punch-down Tool		AT-8762 D-impact Tool
Equipment
A d d		Screwdriver		8-inch Flat Blade
Circuit Packs (CPs)
Initialize		System Administration TerminalR		S - 2 3 2 C
System		Digital Tape Unit (not RS-232C)		—
Test System*		Test Set		Dracon TS21

☛ Used in Section 3 of this manual

2-2