INSTALLATION
73001H Series Voice Terminals
See Figure 2-51.
1.Unpack each terminal and examine it for damage.
2.At the workstation, use a D8W-87 modular cord to connect the NAU jack on the KS-23475, L1 Adapter to the OUT jack on the NAU.
3.Using a D8W-87 modular cord, connect the PHONE jack on the KS- , 23475, L1 Adapter to the voice terminal.
4.Connect the POWER plug on the KS-23475, L1 Adapter to the KS- 22911 Power Unit .
5.Connect the plug on the KS-23475, L1 Adapter’s modular cord to the modular wall jack.
6.Locate the workstation appearance at the SIP and disconnect the octopus cable. Install a WP90581, L1 Y Adapter and connect the octopus cable plug to the VOICE jack.
7.Using a D8W-87 modular cord, connect the DATA jack on the Y adapter to the STARLAN NETWORK NEU IN jack.