ADTRAN 25 manual Restore Completed Successfully

MAINTENANCE

Press c for continue, and the tape unit is automatically started by the system. Restoring translations takes about 5 minutes.

When restoration is complete, the unit stops automatically.

If restoration is successful, the SAT displays:

(feature code issue, date, time, size)

followed by:

RESTORE COMPLETED SUCCESSFULLY

Initiated warm start

8.If above message is not displayed on the SAT, restoration was probably not successful. Force a warm start of the system and check the restart message (see “Restarting the System”). If the system has done a cold restart (which you can tell by reading the restart message), the restoration was not successful.

9.If the restoration was not successful, repeat the restoration process or escalate the problem to a higher support level.

10.Press the REWIND button to rewind the tape fully.

11.Be sure that the tape and the backup tape are labeled and dated accurately and stored in a secure place for future access.

4-19