ADTRAN 25 manual Action, Data

APPENDIX E: Administration Codes and Data

Table E-B. PORT/PD. Administration, Voice Terminals (Menu=1/2)

ACTION	DESCRIPTlON	DATA
0	Physical port number	CSSPP**
1	Enter terminal type code	[See Table E-C]
2	Enter PD.	[1 -9999]
3	Restrict dial access to CC) trunk pool	[1=Y/0=N]
4	Restrict dial access to all other trunk	[1=Y/0=N]
	pools
5	Assign ringing line preference*	[l=Y/0=N]
6	Assign prime line preference*	[Button Number, 7]
7	Assign call coverage receiver group†	[1 -32,0 for none, or
		101-132 DGC receiver
		group, SLAC default is
		0 for none]
8	Assign call coverage ring on no answer†	[1=Y/0=N, SLAC
		default is O for none]
9	Assign call coverage ring on busy†	[1=Y/0=N, SLAC
		default is 0 for none]
10	Make this an extended station‡	[1=Y/0=N]
11	Assign a group pickup number	[1-1 6; 0 for none]
12	PD. of station to hunt to next	[PD.; 0 for none]
14	Assign toll restriction class	[1-5; 0 for none]
15	Assign ARS Facility Restriction Level	[0-3; 3]
16	Enable personal speed dialing	[1=Y/0=N]

*Read-only feature for SLAC.

**Note: The TN746 (Analog Line) has to be installed per Menu 3 first.

†Not administrable for SLAC. For Action 9 for AUDIX Voice Power, set Data = 0 (no) for Merlin telephones, set Data =1 (yes) for single-line telephones.

‡Action 10 cannot be used for the TN746B. Refer to the fallowing information when administering extended stations on the TN746B.

E-2 November 1995