ADTRAN 25 manual Incorrect Entry Must be CSS or 9048

APPENDIX F: Administration Error Messages

	ERROR MESSAGE
	AND DESCRIPTION			POSSIBLE SOLUTION
9 0 4 7	Incorrect	entry.		Must be CSS or 0.
9048	Cannot change board type		Untranslated or (and) remove board
	via the HI D CKT menu.			f i r s t .
9 0 4 9 Invalid TN or ZTN code forUse correct code to set board options
	the HI D CKT menu.			for board type.
9050	At installed maximum			System has the maximum number of
				board/port type.
9 0 5 1 Incorrect entry, board must				Board enabled, cannot administer
	be disabled.			signaling mode.
9052	Cannot change signaling			Channel 24 is administered as the
	mode channel 24			signaling channel.
	translated
9 0 5 3	Entry not	allowed		CSS not administered as a T1 board.
9 0 5 4	Incorrect	entry		Must be 1 to 5.
9 0 5 5	Incorrect entry.			Must be CSS.
9 0 5 6	Entry not allowed			Slot not administered as a T1 board
				or empty.
9 0 6 0	Port removal blocked.			Final port on T1 board administered
				as a synch reference.
9 0 6 1	Translation for port 24			Board administered for 24th channel
	b l o c k e d .			signaling.
12000 Incorrect action number.				Must be O -3 or next action-button.
12003 Action number out of				Must enter action 1 first.
	sequence.
12006 Entry out of range				Data must be 1-255.
12007 Entry out of range				Action 3 data cannot exceed 255.
12008 Action number out of				Enter action 1 and/or 2 first.
	sequence.
12009 Entry out of range				Data must be 0 or 1.
12010 Entry out of range				Data cannnot exceed 104.

F-35