ADTRAN 25 manual Error Message Description Possible Solution, Action = 1 DATA=

APPENDIX F:

Administration Error Messages

APPENDIX F shows Basic Administration error codes and descriptions. The Advanced Administration system uses different terminology. For additional details about an error message in Basic Administration, press the “?” key.

The following table lists and describes error messages that can be displayed at the SAT while administering the system. The table also includes possible solutions for some of the error messages.

	ERROR MESSAGE
AND DESCRIPTION		POSSIBLE SOLUTION
1000: entry out of range must be		Entered data must be a 3- or 4-digit
	3-4 digits	number or 0.
1001:	incorrect entry	This error occurs you try to change
	must be 0 with equipped	the terminal code type. EXAMPLE:
	facility	Go to MENU 2 (PDC). Go to any
		PDC target value and type
		ACTION = 1, you see
		DATA = terminal code
		type 304 etc.
		(Try to change the DATA value to
		another terminal code type) DATA =
		305 you get error 1001: (You have to
		O the terminal type code if you want
		to change its value)
1 0 0 2 :	incorrect PDC	Could be existing PDC number
	does not exist or used	Go to MENU 8 (search)
	improperly	ACTION = 1 DATA= 11
		Hit c to continue to search for
		assigned PDCs
1003:	inappropriate request	The entered mode does not exist.
	incorrect mode
1 0 0 4 : incorrect entry or cabinet		Cabinet-Slot-Port (CSSPP) SS must
	number out of range	be a number from 1 to 3
1005:	incorrect entry	Cabinet-Slot-Port (CSSPP) SS must
	slot number out of range	be a number from 1 to 12

F-1