INSTALLATION
Octopus Cables
Octopus cables (Figure 2-6) connect the station port and CPU/Memory circuit packs to the SIP adapters. Each cable consists of a 25-pair male connector that connects to the switch cabinet and eight modular plugs that connect to the SIP adapters. These cables are provided with all system cabinets.
Figure 2-6. Octopus Cable
8536 Adapter Cable
The 853B Adapter Cable (104305834) connects two octopus cables to a 16-port TN746B Analog Line circuit pack. As shown on Figure 2-6a, each cable consists of one 25-pair male connector (Connector O) and two 25-pair female connectors (Connectors 1 and 2). The cable length is eight feet.
CONNECTOR 1
CONNECTOR O
CONNECTOR 2
Figure 2-6a. 853B Adapter Cable
DS1 Connector Cables
The following Connector cables are available to connect the DS1 Interface circuit packs to DS1 digital facilities:
●H600 307, G2—50-foot long shielded cable equipped with a 50-pin male connector on one end and unterminated at the other end. The cable may be cut to length. Shipped loose are a KS23007, L1 15-pin male
