2 Installing the NIC Software
Verifying NIC Functionality
1000Base-SX NIC
1000 SX- DATA
BASE LINK
TX | RX |
Connectors
The faceplate of the NIC has one
LEDs
There are two LEDs on the faceplate: one to indicate link status and one for data transfer status. Once the NIC hardware and its driver software have been properly installed on your system, the LEDs indicate the following NIC states:
LED | State | Description |
|
|
|
Data | Blinking | Data detected on the port. |
| On | Data detected on the port. |
| Off | No data detected on the port. |
|
|
|
Link | Blinking slowly | Port has been disabled by software. |
| On | Good link. |
| Off | No link; possible bad cable, bad connector, or |
|
| configuration mismatch. |
|
|
|
28