7300H Series Terminal Troubles

If you hear dial tone, continue with this test.

2.Dial the digits 1234567890 *#.

YOU should hear a DTMF signal as each key is pressed.

If the test passes, you will hear dial tone within 1 to 3 seconds after you enter #.

3.Repeat the test for each touch-tone receiver.

4.Replace the Service Circuit CP if this test fails.

S y m p t o m s :

7300H Series terminal LEDs and/or tones not functioning properly.

Procedures:

1.Move the T/P lever on the left-hand side to the “T” (Test) position, and hold it there.

Tone ringing should be heard.

All the red and green LEDs on the terminal should flash alternately while the lever is held in this position.

2. Release the lever, letting it return to its normal position.

Ringing tone should be silenced, and the LEDs should be d a r k .

3. If any part of the test fails, replace the terminal.

Symptoms:

Voice terminal keys don’t click.

4-84

ADTRAN 25 manual 7300H Series Terminal Troubles