4 Replacement Procedures

4.3 PC card/SD memory card

4.3PC card/SD memory card

4.3.1 PC card

Removing the PC card

The following describes the procedure for removing the PC card. (See Figure 4-2)

Caution: Insert or remove the PC card in accordance with any instructions in the PC card manual or the manuals of the computer system you are using.

1.Push the eject button. It will pop out when you release it. Then press the eject button again to eject the PC card.

2.Grasp the PC card and remove it.

Figure 4-2 Removing the PC card

Installing the PC card

The following describes the procedure for installing the PC card. (See Figure 4-2)

1.Make sure the eject button does not stick out.

2.Insert the PC card and press it until it is securely connected.

4-10

PORTEGE R100 Maintenance Manual (960-440)

Page 179
Image 179
Toshiba R100 manual PC card/SD memory card, PC card Removing the PC card, Installing the PC card