Toshiba R100 manual Memory module, Removing the memory module

4 Replacement Procedures 4.4 Memory module

4.4Memory module

Caution: The power of the computer must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend the memory module.

Removing the memory module

To remove a memory module, confirm that the computer is in boot mode. Then perform the following procedure (See Figures 4-4, 4-5)

1.Turn the computer upside down.

2.Remove the following screws fixing the memory slot cover.

• M2⋅2.5B SPECIAL HEAD screw x1

Figure 4-4 Removing the memory slot cover

3. Remove the memory slot cover.

4-12 PORTEGE R100 Maintenance Manual (960-440)