Toshiba R100 manual Indicates auto power on and Wake-up on LAN is not set

3.24 SETUP 3 Tests and Diagnostics

Always Low Disables Intel SpeedStep technology and always runs the processor at low power consumption and low speed

(e) Auto Power On

This option displays setting for Wake-up on LAN.

Disabled	Indicates auto power on and Wake-up on LAN is not set.
Enabled	Indicates auto power on and Wake-up on LAN is set.

When “Enabled” is set, the following sub-window appears.

Auto power on and Wake-up on LAN is set in the options sub-window. To set alarm time, use Space and BackSpace. To switch between time and minute, month and date, use ↑ and ↓.

	OPTIONS
Alarm Time		= 00:00:00
Alarm Date Option		= Disabled
Wake-up on LAN		= Disabled

Alarm Time sets a time and date for automatic power on. Second cannot be set. When this option is set to “Disabled”, the time for automatic power on is not set.

Alarm Date Option sets a month and date in order for automatic power on. When Alarm Time is set to “Disabled”, month and date for automatic power on is not set.

Wake-up on LAN automatically turn on the computer when accessed by the administrator of LAN. When Built-in LAN is “Enabled”, this option can be set to “Enabled”. AC adapter is required for this option.

NOTE: 1. Do not remove the AC adapter and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.

2.If you have set a password and the computer boots by the Auto Power On function and Resume is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.

3.This option is enabled only once, the setting is reset, after booting up

PORTEGE R100 Maintenance Manual (960-440) 3-69