4.1 Overview | 4 Replacement Procedures |
4.1Overview
This chapter describes the procedure for removing and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one. The chart below provides a guide as to which other FRUs must be removed before a particular FRU can be removed. The numbers in the chart indicate the relevant section numbers in this manual.
In all cases when removing an FRU, the battery pack must also be removed. When repairing an FRU that is the potential cause of a computer fault, use the chart to determine the order in which FRUs need to be removed.
Chart Notation:
The chart to the right shows the case for the following example:
•Removing the touch pad.
All FRUs
(from 4.2 Battery to
4.6Keyboard/Bottom) must be removed.
PORTEGE R100 Maintenance Manual |
