PC card slot4 Replacement Procedures

4.11 PC card slot4 Replacement Procedures

The following describes the procedure for removing the PC card slot. (See Figure 4-22) 1. Remove the following screws fixing the PC card slot.

• M2⋅4Z FLAT BIND screw x2

2.Release the lock of the connector PJ11 on the system board and remove the PC card slot.

The following describes the procedure for installing the PC card slot. (See Figure 4-22)

1.Connect the PC card slot to PJ11 on the system board and lock it.

2.Secure the PC card slot with the following screws.

• M2⋅4Z FLAT BIND screw x2

4-31