Toshiba R100 manual Wireless LAN board, Removing the wireless LAN board

4 Replacement Procedures 4.10 Wireless LAN board

4.10 Wireless LAN board

Removing the wireless LAN board

The following describes the procedure for removing the wireless LAN board. (See Figures 4-19, 4-20, 4-21)

1. Remove the following screws.

•	M2⋅4Z FLAT BIND screw	x2 or x1
•	TORX screw	0 or x1

(When a specified Wireless LAN board is used, a TORX screw is used.)

Figure 4-19 Removing the wireless LAN board(1)

2.Turn over the computer.

3.Remove the wireless board upward from PJ100 on the system board and peel off the glass tape.

4-28 PORTEGE R100 Maintenance Manual (960-440)