Toshiba R100 manual Speaker/ RTC battery, Speaker Removing the speaker

4.9 Speaker/ RTC battery 4 Replacement Procedures

4.9Speaker/ RTC battery

4.9.1 Speaker

Removing the speaker

The following describes the procedure for removing the speaker (See Figures 4-16, 4-17).

1. Peel off the glass tape.

Figure 4-16 Peeling off the glass tape

2.Remove the speaker cable from connector PJ6002 on the system board and remove the speaker rubber holder from the speaker slot.

3.Remove the speaker from the rubber holder.

Figure 4-17 Removing the speaker

PORTEGE R100 Maintenance Manual (960-440) 4-25