4.9 Speaker/ RTC battery 4 Replacement Procedures
4.9.2 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery. (See Figure 4-18)
1. Disconnect the RTC battery cable from PJ8760 on the system board and remove
the RTC battery from the RTC battery slot.
Figure 4-18 Removing the RTC battery
Installing the RTC battery
The following describes the procedure for installing the RTC battery (See Figure 4-18).
1. Install the RTC battery passing through the hole of the RTC battery slot. Connect
the RTC battery cable PJ8760 on the system board.
2. Apply the glass tape.
PORTEGE R100 Maintenance Manual (960-440) 4-27