Toshiba R100 MDC board/HDD cable, MDC board Removing the MDC board, Installing the MDC board

4.8 MDC board/HDD cable 4 Replacement Procedures

4.8MDC board/HDD cable

4.8.1 MDC board

Removing the MDC board

The following describes the procedure for removing the MDC board. (See Figure 4-14.)

1.Peel off the glass tape. (See Figure 4-12.)

2.Remove the following screws securing the MDC board.

• M2⋅4Z FLAT BIND screw x2 3. Disconnect the MDC cable from the MDC board.

Figure 4-14 Removing the MDC board

Installing the MDC board

The following describes the procedure for installing the MDC board. (See Figure 4-14)

1.Connect the MDC cable to the MDC board.

2.Install the MDC board and secure it with the following screws.

• M2⋅4Z FLAT BIND screw x2 3. Apply the glass tape to secure the MDC cable.

PORTEGE R100 Maintenance Manual (960-440) 4-23