
4.16 LCD mask/FL inverter/LCD | 4 Replacement Procedures |
4.16 LCD mask/FL inverter/LCD
4.16.1 LCD mask
Removing the LCD mask
The following describes the procedure for removing the LCD mask. (See Figure
1.Remove the six mask seals and four LCD cushions on the LCD mask, and remove the following screws.
• M2⋅4Z
2.Carefully insert the fingers of both hands between the mask and the LCD module and pry up to release the latches. Do one side at a time.
Figure 4-30 Removing the LCD mask
PORTEGE R100 Maintenance Manual |