Toshiba R100 manual Fluorescent Lamp

4 Replacement Procedures 4.19 Fluorescent Lamp

4.19 Fluorescent Lamp

This system uses LCD modules from the following supplier.

Type	Part.No	Supplier	Section
12.1 inch	G33C0000U110001	Toshiba Matsushita	4.19.1

Note: - When working with an LCD module, always use a flat, grounded table.

-Handle the backlight unit in the environment without dust, such as on the clean bench. Keep the worktable free from any screws or other material that may scratch the LCD surface.

-Use an anti-static or protective sheet.

-When replacing the FL unit, cover with a finger protector or similar to prevent dirtying or scratching the LCD panel.

-Take care when handling the lamp. Excessive force may break the lamp.

-Take care not to deform the lamp reflector or allow it to get dirty.

-Ensure always that the power of the LCD module is turned off before connecting or disconnecting cables and connectors.

4-50 PORTEGE R100 Maintenance Manual (960-440)