4 Replacement Procedures 4.19 Fluorescent Lamp
2. Assembling the cell with the PCB.
1) Illuminate the backlight.
2) Make sure there are no scratches or dirt on the backlight. Also, check the back
of the cell. Next, install the cell with the PCB to the backlight unit.
Caution: 1) Install by aligning the left side under the corner as shown below.
2) Be careful not to damage the FPC.
Figure4-45 Replacing Toshiba fluorescent lamp(7)
4-56 PORTEGE R100 Maintenance Manual (960-440)