3 Tests and Diagnostics

3.16 Sound/LAN/Modem Test

 

Completing

SoundMAX/ICH microphone capture test

 

End time

XXX XXX XX XX*XX:XX XXXX

 

System Status

0x0

 

Performing SoundMAX/ICH play buffer to line out

 

Start Time:

XXX XXX XX XX:XX:XX XXXX

 

Play to destination is LINEOUT

 

Volume requested is X.XXX dB

 

Play from buffer name is BUFFER0

 

Requested play time is 5.000 seconds.

 

Actual play time will be 5.000 seconds.

 

Completing SoundMAX/ICH play buffer to line out

 

End Time XXX XXX XX :XX:XX XXXX

 

System Status 0x0

 

Test completed at XXX XXX XX :XX:XX XXXX

 

System completion code was 0x0

 

Then, the screen returns to the main menu and the following message will

 

appears.

 

 

....Press test number[1-4] ?

 

To execute a subtest continuously, select the test number and press Enter. To

 

exit the Sound/LAN/Modem test, remove the test program disk from the USB

 

FDD and turn off the computer.

Subtest 02

Sin Wave

 

 

This subtest is executed by the load format of COM file (ADSIN.COM). The

 

program expands sin wave data table to data in 16-64KB, and creates play

 

data (It sounds like continuous beep). By using wave measuring devices such

 

as an oscilloscope, this program can read sine wave without expanding.

When the subtest is executed, the following message appears.

....Press test number[1-4] ? pause

Press any key to continue...

Press any key, and the following message appears. Then sin wave is expanded to 16-64KB data and is played.

....Press test number[1-4] ? call sin

When the beep sound finished, the screen returns to the main menu and the following massage appears.

3-40

PORTEGE R100 Maintenance Manual (960-440)

Page 130
Image 130
Toshiba R100 manual Appears