3.2 Executing the Diagnostic TestExecuting the Diagnostic Test

3 Tests and Diagnostics

4.Select the option you want to execute on the test menu and press Enter. When you select 1- SYSTEM TEST, the following message will appear:

TEST NAME

XXXXXXX

XXXXDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end

[Ctrl]+[C]

; key stop

SUB-TEST : XX

ERROR COUNT: XXXXX

PASS COUNT: XXXXX

WRITE DATA: XX

READ DATA : XX

ADDRESS : XXXXXX

STATUS : XXX

SUB-TEST MENU :

 

01 - ROM checksum

02-

03-

04– Fan ON/OFF

05- Geyserville

06- Quick charge

07- DMI read

08- DMI write

09- CPU Temperature

99- Exit to DIAGNOSTIC TEST MENU

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

5.Select the desired subtest number from the subtest menu and press Enter. The following message will appear:

TEST LOOP : YES (or NO)

ERROR STOP : YES (or NO)

Use the right and left arrow keys to move the cursor to the desired option.

Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle.

Selecting NO of TEST LOOP returns the process to the subtest menu after the test is complete.

PORTEGE R100 Maintenance Manual (960-440)

3-5

Page 95
Image 95
Toshiba R100 manual Test Name