Toshiba R100 manual Tests and Diagnostics USB Floppy Disk Test

3 Tests and Diagnostics 3.8 USB Floppy Disk Test

3.8USB Floppy Disk Test

COUTION: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD. Otherwise, the contents of the floppy disk will be erased.

To execute the Floppy Disk Test, select 5-FLOPPY DISK TEST from the DIAGNOSTIC TEST MENU, press Enter.

1.The following message will appear. Select the start track of the floppy disk drive to be tested then press Enter.

Test start track (Enter:0/dd:00-79)

2.The Floppy Disk test contains five subtests that test the FDD.

The floppy disk test menu will appear after you select FDD test parameters.

SUB-TEST MENU:

01-Sequential read

02-Sequential read/write

03-Random address/data

04-Write specified address

05-Read specified address

99-Exit to DIAGNOSTIC TEST MENU

Select the number of the subtest you want to execute and press Enter. The following message will appear during the floppy disk test.

Floppy Disk		XXXXXXX
SUB-TEST
PASS COUNT:XXXXX			ERROR COUNT:XXXXX
WRITE DATA:XXXXX			READ DATA	:XX
ADDRESS	:XXXXXX		STATUS	:XXX

xxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ;test end

[Ctrl]+[C] ;key stop

3-20 PORTEGE R100 Maintenance Manual (960-440)