
4.17 LCD cable/Wireless LAN cable/Antenna cover | 4 Replacement Procedures |
4.17.2 Wireless LAN cable/Antenna cover
Removing the Wireless LAN cable/Antenna cover
The following describes the procedure for removing the Wireless LAN cable. (See Figures
1.Remove the following screw securing the Wireless LAN cable holder on the backside of the palmrest cover.
• M2⋅4Z
Figure 4-35 Removing the Wireless LAN cable holder (1)
2.Remove the following screws securing both the hinges on the LCD cover side and detach the LCD cover from the palmrest cover. (Same as when removing the LCD cable.)
PORTEGE R100 Maintenance Manual |