4 Replacement Procedures

4.8 MDC board/HDD cable

4.8.2 HDD cable

Removing the HDD cable

The following describes the procedure for removing the HDD cable. (See Figure 4-15) 1. Remove the HDD cable from the connector PJ3 on the system board.

Figure 4-15 Removing the HDD cable

Installing the HDD cable

The following describes the procedure for installing the HDD cable. (See Figure 4-15) 1. Connect the connector PJ3 to the system board and install the HDD cable.

4-24

PORTEGE R100 Maintenance Manual (960-440)

Page 193
Image 193
Toshiba R100 manual HDD cable Removing the HDD cable, Installing the HDD cable