12 LAN/MODEM jack, Removing the LAN/MODEM jack

4 Replacement Procedures

4.12 LAN/MODEM jack

Removing the LAN/MODEM jack

The following describes the procedure for removing the LAN/MODEM jack. (See Figure 4-23.)

1.Peel off the two glass tapes securing the MODEM cable.

2.Disconnect the LAN cable from PJ4100 on the system board.

3.Remove the LAN/MODEM jack from the slot.

The following describes the procedure for installing the LAN/MODEM jack. (See Figure 4-23.)

1.Install the LAN/MODEM jack to the slot.

2.Connect the LAN cable to PJ4100 on the system board.

3.Secure the MODEM cable with two glass tapes.

4-32	PORTEGE R100 Maintenance Manual (960-440)