Toshiba R100 manual CNT Errors STS Addr WD RD Hsts

3 Tests and Diagnostics 3.20 Log Utilities

3.20.2Operations

Selecting 5-LOG UTILITIES and pressing Enter in the DIAGNOSTIC MENU logs error information into RAM or onto a floppy disk. The error information is displayed in the following format:

CNT	0003 ERRORS				STS		ADDR	WD RD HSTS			[ERROR STATUS NAME]
	TS-No		PASS
001	FDD 01		0000		110		24015	00 00			FDD-CRC ERROR
002	FDD 01		0001		110		30108	00 00			FDD-CRC ERROR
003	FDD 03		0003		110		23106	00 00			FDD-CRC ERROR
							FDD/HDD or
						statusmemory address
				Error						HDC status
			Pass count
									Read data
											Error status name
		Subtest number						Write data
	Test name
Error count

[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]

2.The error information displayed on the screen can be manipulated by the following number keys:

The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostic Menu.

The 4 key erases all error log information in RAM. The 5 key outputs the error log information to a printer. The 6 key reads the log information from a floppy disk. The 7 key writes the log information to a floppy disk.

3.In the case of “error retry OK,” a capital “R” will be placed at the beginning of the error status. However, it is not added to the error count.

3-48 PORTEGE R100 Maintenance Manual (960-440)