Tyan Computer S2912 warranty Installing the Power Supply, Applying power to the board

2.10- Installing the Power Supply

There are three power connectors on your Thunder n3600R.

The Thunder n3600R requires an EPS12V (24 pin + 8 pin +4 pin) power supply. All the three power connectors must be installed in order to boot up the system.

Please be aware that ATX 2.x and ATXGES power supplies are not compatible with the board and can damage the motherboard and/or CPU(s).

		12	+3.3V	24	GND
		11	+12V1	23	+5V
		10	+12V1	22	+5V
1	1 2	9	+5VSB	21	+5V
		8	PWR OK	20	RESVD
		7	GND	19	GND
		6	+5V	18	GND
		5	GND	17	GND
13	2 4
		4	+5V	16	PSON#
		3	GND	15	GND
		2	+3.3V	14	-12V
		1	+3.3V	13	+3.3V

14

58

EPS 12V 8-pin (CPU Power)

4	GND	8	+12V2
3	GND	7	+12V2
2	GND	6	+12V2
1	GND	5	+12V2

3

4

1

2

4	+12V3
3	+12V3

2GND

1GND

Applying power to the board

1.Connect the EPS 12V 8-pin power connector.

2.Connect the EPS 12V 24-pin power connector.

3.Connect the EPS 12V 4-pin power connector.

4.Connect power cable to power supply and power outlet.

NOTE

YOU MUST unplug the power supply from the wall outlet before plugging the power cables to motherboard connectors.

32

http://www.tyan.com