Tyan Computer S2912 warranty Parallel Port, Mode, DMA Channel, Floppy Disk Controller

Base I/O Address

Set the base I/O address for serial port B.

Options: 3F8 / 2F8 / 3E8 / 2E8

Interrupt

Set the interrupt for serial port B.

Options: IRQ4 / IRQ3

Parallel Port

Configure parallel port using options: [Disabled]: No configuration [Enabled]: User configuration Options: Disabled / Enabled

Base I/O Address

Set the base I/O address for the parallel port.

Options: 378 / 278 / 3BC / Disabled

Interrupt

Set the interrupt for the parallel port.

Options: IRQ7 / IRQ5

Mode

Set the mode for the parallel port using options: [Output Only], [Bi-directional], [EPP], [ECP].

Options: ECP / EPP / Output Only / Bi-directional

DMA Channel

Set the DMA channel for the parallel port.

Options: DMA1 / DMA3

Floppy Disk Controller

This defines how the floppy disk controller is detected and configured. Options: Disabled / Enabled / Auto

Base I/O Address

Set the base I/O address for the floppy disk controller.

Options: Secondary / Primary

55

http://www.tyan.com