Tyan Computer S2912 warranty Display shadow-area

		data bits of low byte of				APIC
		memory bus
2Fh		Enable cache before			68h	Enable external and CPU
		system BIOS shadow				caches
30h		1-4-1-1	. RAM failure on		69h	Setup System Management
		data bits of high byte of				Mode (SMM) area
		memory bus
Code		Beeps / Description			Code	Beeps / Description
6Ah		Display external L2 cache			A2h	Check key lock
		size
6Bh		Load custom defaults			A4h	Initialize Typematic rate
		(optional)
6Ch		Display shadow-area			A8h	Erase F2 prompt
		message
6Eh	Display possible high				AAh	Scan for F2 key stroke
		address for UMB recovery
70h		Display error messages			ACh	Enter SETUP
72h		Check for configuration			AEh	Clear Boot flag
		errors
76h		Check for keyboard errors			B0h	Check for errors
7Ch		Set up hardware interrupt			B2h	POST done - prepare to
		vectors				boot operating system
7Eh		Initialize coprocessor if			B4h	One short beep before boot
		present
80h		Disable onboard Super I/O			B5h	Terminate QuietBoot
		ports and IRQs				(optional)
81h		Late POST device			B6h	Check password (optional)
		initialization
82h		Detect and install external			B9h	Prepare Boot
		RS232 ports
83h		Configure non-MCD IDE			BAh	Initialize DMI parameters
		controllers
84h		Detect and install external			BBh	Initialize PnP Option ROMs
		parallel ports
85h		Initialize PC-compatible			BCh	Clear parity checkers
		PnP ISA devices
86h.		Re-initialize onboard I/O			BDh	Display MultiBoot menu
		ports.
87h		Configure Motherboard			BEh	Clear screen (optional)
		Devices
88h		Initialize BIOS Data Area			BFh	Check virus and backup
						reminders
89h		Enable Non-Maskable			C0h	Try to boot with INT 19
		Interrupts (NMIs)
8Ah		Initialize Extended BIOS			C1h	Initialize POST Error
		Data Area				Manager (PEM)
8Bh		Test and initialize PS/2			C2h	Initialize error logging
		mouse
8Ch		Initialize floppy controller			C3h	Initialize error display
						function
8Fh		Determine number of ATA			C4h	Initialize system error
		drives (optional)				handler
90h		Initialize hard-disk			C5h	PnPnd dual CMOS
		controllers				(optional)
91h		Initialize local-bus hard-disk			C6h	Initialize notebook docking
		controllers				(optional)
92h		Jump to UserPatch2			C7h	Initialize notebook docking
				67
			http://www.tyan.com