FIRST THINGS FIRST
Step 1: Unpack What’s in the Box
The following items come packed in the box:
•VCR
•Remote control
•RF coaxial cable
Step 2: Install Batteries in the Remote Control
Follow these steps whenever you need to install or change the batteries in your VCR remote.
1.Remove the cover of the battery compartment.
2.Place batteries in remote, matching the + and – ends of each battery to the diagram inside the compartment.
3.Replace the cover.
Step 3: Connect Your VCR
If you connect your VCR to your home antenna or cable system and then to your TV, use the VCR’s ANT.IN and RF OUT jacks for a good signal as shown.
If you have a TV with AUDIO/VIDEO jacks, use the audio/video jacks on the TV and VCR for a better connection. Refer to the Connections section, toward the back of the manual.
CABLE, CABLE BOX, OR 
ANTENNA
VCR
ANT.IN
VIDEO AUDIO
IN
RF OUT
3 CH. 4
OUT
TV
CABLE/
ANTENNA
4
