GE VG4061 About Programming the Remote, Programming the Remote to Control a TV, Operate the TV

PROGRAMMING THE REMOTE

About Programming the Remote

The remote can be programmed to control other brands of remote controllable TVs. It is already programmed to operate most GE, RCA, and ProScan TVs.

Programming the Remote to Control a TV

If the TV does not turn on when you press the TV button, the remote needs to be programmed.

Follow these steps to program the remote to control your particular TV:

1.Turn on the TV.

2.Find your TV brand and code number(s) on the code list on the next page.

3.Press and hold the TV button on the remote.

4.Enter the two-digit code from the code list.

5.Release TV, and then press CHAN up or down. If the TV responds to the remote commands, the remote is programmed.

6.If the TV does not respond, repeat these steps using the next code in the list.

Operate the TV

After you set up the remote, see which buttons operate your TV.

1.Point the remote at the TV, and press the TV button.

If the TV does not turn on, press the TV button and then press the OFF button.

2.You may want to experiment to see which buttons operate your TV. Try pressing buttons, such as VOL and MUTE. See “TV Function Buttons” in the VCR Basic section for details.

This remote may not operate all models of the brands that are shown.

Note the difference between the TV and VCR on-screen displays to see which one the remote is operating.

32