GE VG4061 manual Time Counter, Zero Search

Models: VG4061

1 60
Download 60 pages 42.85 Kb
Page 40
Image 40

OTHER FEATURES

Zero Search

The zero search feature enables the VCR to quickly return to a counter reading of 0:00:00 anywhere on the tape. This is especially convenient when you want to repeat a segment of the tape several times.

1.Go to the beginning of the program you wish to return to.

2.Press INFO twice to display the time counter on the TV screen.

3.Press CLEAR to reset the counter to 0:00:00.

4.Continue playing the tape.

5.Press STOP when you are ready to return to 0:00:00.

6.Press SEARCH on the remote twice to display the ZERO SEARCH menu.

7.Press REVERSE (REV) to return to 0:00:00 on the tape.

ZERO SEARCH

Current tape counter is

2:17:25

Press REV to go to 0:00:00

Press SEARCH to exit

ZERO SEARCH

Searching for 0:00:00

Press STOP to cancel

Time Counter

The time counter shows the actual time it takes to record a program or play back a segment of a recorded tape. It helps locate the beginning or end of programs you taped. The time counter resets to 0:00:00 whenever the tape is ejected from the VCR.

For example, if you record a 30-minute program at the beginning of the tape and you want to go to the end of that program to begin another recording, you would:

1.Press INFO twice to display the time counter.

2.Press CLEAR to reset the time counter to 0:00:00.

3.Press FORWARD (FWD) to forward the tape until the time counter reads 0:30:00.

4.Press STOP. This is the approximate end of the program. (You may want to press PLAY to verify.) Now, you can begin recording at this spot.

5.Press INFO to remove the time counter from the screen and return to the normal display mode.

0:30:00

Hours

Minutes

Seconds

38

Page 40
Image 40
GE VG4061 manual Time Counter, Zero Search