VCR BASICS
Numbers (0 through 9) Select a channel up to 99 by pressing two numbers. Select a cable channel over 99 by pressing and holding 1 until 1 – – appears on the screen. Then press the other two numbers.
OFF Turns the TV off.
VOL Up and Down Raises and lowers sound of TV.
Playing a Tape
1.Tune the TV to your VCR viewing channel (3, 4, or TV’s video input).
2.Insert a tape in the VCR.
POWER STOP • EJECT | CHANNEL | RECORD REV PLAY • PAUSE FWD |
TRACKING 
If the Auto Play feature is set to ON, the tape automatically begins playback (if the safety tab on the cassette is removed).
•Press FWD or REV (FORWARD or REVERSE on remote) to position the tape.
•Press PLAY•PAUSE (PLAY) (if necessary) to begin tape play.
•Press PLAY•PAUSE (PAUSE) for stop action.
•Press TRACKING up or down to remove any streaks from the picture, if necessary.
•Press STOP•EJECT (STOP) to stop playback.
Tape Eject
Press STOP•EJECT on the VCR when it is stopped to eject the tape.
Pause
If you pause, the VCR automatically switches from pause to stop after a few minutes to reduce tape wear.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when playing back a tape recorded on another VCR. Automatic tracking is turned on whenever a tape is inserted or the VCR’s power is turned on.
20
